Al-Ga-Mn-Ca-Cu合金电极碱性体系电化学性能

通过熔铸、压延、退火等一系列工艺制作了新型Al-0.017Ga-0.885Mn-0.038Ca-0.048Cu (wt.%)阳极合金，并通过了EIS、极化曲线分析研究了其在不同浓度NaOH溶液中的腐蚀行为和电化学性能。结果表明，随着NaOH浓度的增加，合金阳极的自腐蚀速率在逐渐增加，Al-0.017Ga-0.885Mn-0.038Ca-0.048Cu合金在4mol/LNaOH溶液中的腐蚀速率增长速度明显降低，放电电压在电流密度为120mA/cm2下仍能维持在1 V左右，阳极能量密度也最高，达6.056kW?h/kg，更适合不同电流密度下的连续恒流放电。且合金的恒流放电和EIS结果与腐蚀特性吻合较好。     

Effect of UV-C irradiation on inactivation of Aspergillus flavus and Aspergillus parasiticus and quality parameters of roasted coffee bean (Coffea arabica L.)

ABSTRACT

This study investigated the antifungal effect of ultraviolet-C (UV-C) against Aspergillus flavus and Aspergillus parasiticus on roasted coffee beans. Also, any changes in the quality of the roasted coffee beans were measured after UV-C irradiation. As UV-C irradiation time increased (0–2 h), the number of surviving A. flavus and A. parasiticus spores significantly (P < .05) decreased. The reduction values of A. flavus in round part, crack part, and whole roasted coffee beans were 2.16, 0.71, and 1.58 log₁₀ CFU g^?1, respectively, and the reduction values of A. parasiticus in round part, crack part, and whole roasted coffee beans were 1.03, 0.37, and 0.72 log₁₀ CFU g^?1, respectively, after 2 h of UV-C irradiation. Field emission scanning electron microscopy showed that the morphology of A. flavus and A. parasiticus spores included expanded wrinkles that were deformed by UV-C irradiation. The Hunter colours were significantly reduced (P < .05). There was no significant change (P > .05) in moisture content, but the pH was significantly decreased (P < .05). Most of the sensory parameters did not change, but there was a significant difference (P < .05) in flavour. Based on this study, 2 h of UV-C irradiation was effective in reducing 90% of A. flavus, but it was not effective against A. parasiticus present on roasted coffee beans. Also, Hunter colour, pH, and sensory parameters (flavour) were changed by UV-C irradiation.     

Improving weld formability by a novel dual-rotation bobbin tool friction stir welding

A novel dual-rotation bobbin tool friction stir welding (DBT-FSW) was developed, in which the upper shoulder (US) and lower shoulder (LS) have different rotational speeds. This process was tried to weld 3.2 mm thick aluminum-lithium alloy sheets. The metallographic analysis and torque measurement were carried out to characterize the weld formability. Experimental results show that compared to conventional bobbin tool friction stir welding, the DBT-FSW has an excellent process stability, and can produce the defect-free joints in a wider range of welding parameters. These can be attributed to the significant improvement of material flow caused by the formation of a staggered layer structure and the unbalanced force between the US and LS during the DBT-FSW process.     

Local body cooling to improve sleep quality and thermal comfort in a hot environment

The effects of local body cooling on thermal comfort and sleep quality in a hot environment were investigated in an experiment with 16 male subjects. Sleep quality was evaluated subjectively, using questionnaires completed in the morning, and objectively, by analysis of electroencephalogram (EEG) signals that were continuously monitored during the sleeping period. Compared with no cooling, the largest improvement in thermal comfort and sleep quality was observed when the back and head (neck) were both cooled at a room temperature of 32°C. Back cooling alone also improved thermal comfort and sleep quality, although the effects were less than when cooling both back and head (neck). Mean sleep efficiency was improved from 84.6% in the no cooling condition to 95.3% and 92.8%, respectively, in these conditions, indicating good sleep quality. Head (neck) cooling alone slightly improved thermal comfort and subjective sleep quality and increased Stage N3 sleep, but did not otherwise improve sleep quality. The results show that local cooling applied to large body sections (back and head) could effectively maintain good sleep and improve thermal comfort in a hot environment.     

Airborne bacterial assemblage in a zero carbon building: A case study

Currently, there is little information pertaining to the airborne bacterial communities of green buildings. In this case study, the air bacterial community of a zero carbon building (ZCB) in Hong Kong was characterized by targeting the bacterial 16S rRNA gene. Bacteria associated with the outdoor environment dominated the indoor airborne bacterial assemblage, with a modest contribution from bacteria associated with human skin. Differences in overall community diversity, membership, and composition associated with short (day‐to‐day) and long‐term temporal properties were detected, which may have been driven by specific environmental genera and taxa. Furthermore, time‐decay relationships in community membership (based on unweighted UniFrac distances) and composition (based on weighted UniFrac distances) differed depending on the season and sampling location. A Bayesian source‐tracking approach further supported the importance of adjacent outdoor air bacterial assemblage in sourcing the ZCB indoor bioaerosol. Despite the unique building attributes, the ZCB microbial assemblage detected and its temporal characteristics were not dissimilar to that of conventional built environments investigated previously. Future controlled experiments and microbial assemblage investigations of other ZCBs will undoubtedly uncover additional knowledge related to how airborne bacteria in green buildings may be influenced by their distinctive architectural attributes.     

The effect of TiO2 nanotube morphological engineering and ZnS quantum dots on the water splitting reaction: A theoretical and experimental study

Ordered arrays of TiO₂ nanotubes with smooth and rippled morphologies were prepared by one-step titanium oxidation in NH₄F and ethylene glycol solution. The samples were then decorated with ZnS using a microwave-assisted solvothermal method. The experiments under constant or pulsed applied voltage resulted in smooth and rippled TiO₂material morphologies, respectively. Field emission scanning electron microscopy, incident photon-to-current efficiency, linear sweep voltammetry and electrochemical impedance spectroscopy were used to investigate the structure and morphology of the TiO₂ nanotubes, along with their photoelectrochemical activity in the water splitting reaction. An envelope function was proposed to correlate the anisotropic morphologies and broad distribution of mobility due to the random nature of charge carrier transport. The smooth and rippled morphologies were evaluated using the transmission line model. First-principles quantum mechanical calculations based on the density functional theory at the B3LYP level are conducted to obtain a better understanding of optical properties of TiO₂.     

Evaluation of the minimum face clearance of a high-speed gas-lubricated bearing with Navier slip boundary conditions under random excitations

Motivated by ongoing developments in aero-engine technology, a model for a coupled gas-lubricated bearing is developed in terms of an extended dynamical system. A slip boundary condition, characterised by a slip length, is incorporated on the bearing faces which can be relevant for operation in non-ideal extreme conditions, notably where external vibrations or disturbances could destabilise the bearing. A modified Reynolds equation is formulated to model the gas flow, retaining the effects of centrifugal inertia which is increasingly important for high-speed operation, and is coupled to the structural equations; spring-mass-damper systems model the axial stator and rotor displacements. A novel model is developed corresponding to a bearing experiencing an external random force to evaluate the resulting induced displacements of the bearing components. The minimum face clearance is obtained from a mapping solver for the modified Reynolds equation and structural equations simultaneously. In the case of random excitations, the solver is combined with a Monte Carlo technique. Evaluation of the average value of the minimum gap and the probability of the gap reaching a prescribed tolerance are provided. Extensive insight is given on the effect of key bearing parameters on the corresponding bearing dynamics.     

利用Sn-Ag-Ti活性焊料直接活化软焊接合Al_(0.3)CrFe _(1.5)MnNi_(0.5)高熵合金与6061铝合金（英文）

高熵合金Al_(0.3)Cr Fe_(1.5)Mn Ni_(0.5)(HEA)具有许多特殊性能。在大气环境、接合温度为250℃保持60 s的条件下,以Sn3.5Ag4Ti为活性焊料对HEA/HEA及HEA/6061-Al进行直接活性软焊接合,并对其进行显微组织及剪力强度分析。实验结果显示,在接合过程中,高熵合金中所有元素缓慢扩散进入连接区域。HEA/HEA和HEA/6061-Al样品的剪切强度分别为(14.20±1.63)和(15.70±1.35)MPa。HEA/6061-Al样品的断裂面呈显明显的半脆性断裂特征。